Tag

Analog connections

Line, phono and speaker-level paths and terminations

7 articles

Articles tagged Analog connections

Most recently updated first.
Amplifiers & preamps

Integrated amplifier, receiver, preamp and power amp: explained

A control preamplifier selects a source and adjusts listening volume. A power amplifier supplies the electrical output that drives passive speakers. An integrated amplifier combines those functions, while a conventional stereo receiver adds reception, traditionally radio. Digital inputs, streaming, a phono stage and headphone outputs are additional features to check, not functions guaranteed by every amplifier name.

PN
Pure Neo editorialUpdated 14 Oct 2026
Turntables & analog sources

Phono vs line: which input should your turntable use?

A phono signal from a magnetic cartridge needs gain and playback equalization before it feeds a line input. A turntable’s processed LINE output goes to a line input; its unprocessed PHONO output goes to a compatible phono stage. The connectors can look identical, so check signal function and switch settings rather than plug shape.

PN
Pure Neo editorialUpdated 11 Oct 2026
Connections & compatibility

No sound or one speaker not working: what to check

For missing sound, check playback destination, selected input, mute, volume, balance and speaker selection before changing cables. Then inspect compatible connections with power off. If one channel remains silent, a controlled line-input swap can narrow the fault path. Stop for damage, abnormal heat or repeated protection shutdown; those need qualified service.

PN
Pure Neo editorialUpdated 11 Oct 2026
Connections & compatibility

Why do speakers hum, buzz or hiss? Safe checks

Hum, buzz and hiss can come from different parts of a system. Note when the noise occurs, which speaker is affected and whether it changes with volume, then isolate one permitted external signal path at a time. Never remove protective earth to cure noise. Damage, shock, abnormal heat or repeated protection shutdown requires qualified service.

PN
Pure Neo editorialUpdated 11 Oct 2026
Connections & compatibility

Speaker wire gauge: length, resistance and connections

Choose speaker cable by the run length, conductor resistance, speaker load and the sizes accepted by both terminals. Longer runs and lower-impedance loads make cable resistance more important. In AWG sizing, a lower number means a thicker conductor. Secure connections and suitable installation matter more than the thickness of the outer jacket.

PN
Pure Neo editorialUpdated 11 Oct 2026
Speakers & subwoofers

How to connect a subwoofer to a stereo amplifier

Connect a powered subwoofer through a compatible subwoofer output, variable preamp outputs or an explicitly supported high-level input. Confirm that its level follows the main volume control and identify which device provides the filtering. Socket shape alone cannot establish compatibility, and a speaker-terminal connection needs the exact equipment’s wiring instructions.

PN
Pure Neo editorialUpdated 11 Oct 2026
Load more