Basics
No prior hi-fi vocabulary assumed.
Articles tagged Basics
Integrated amplifier, receiver, preamp and power amp: explained
A control preamplifier selects a source and adjusts listening volume. A power amplifier supplies the electrical output that drives passive speakers. An integrated amplifier combines those functions, while a conventional stereo receiver adds reception, traditionally radio. Digital inputs, streaming, a phono stage and headphone outputs are additional features to check, not functions guaranteed by every amplifier name.
Active, powered and passive speakers: what is the difference?
Passive speakers need an external power amplifier. Powered speakers include amplification. Active, in its precise technical sense, describes a crossover that divides the audio into frequency bands before separate amplifiers drive the relevant drivers. A powered speaker can use either arrangement, so check the design and connections rather than relying on the label alone.
What do you need for a hi-fi system?
A hi-fi system needs a source, volume control, amplification and speakers or headphones. Digital sources need digital-to-analogue conversion; records need a phono stage. Several functions can share one device, so a complete system may use only a few boxes. Follow the signal path to see what you already have and what is missing.
Phono vs line: which input should your turntable use?
A phono signal from a magnetic cartridge needs gain and playback equalization before it feeds a line input. A turntable’s processed LINE output goes to a line input; its unprocessed PHONO output goes to a compatible phono stage. The connectors can look identical, so check signal function and switch settings rather than plug shape.
Room acoustics basics: direct sound, reflections and bass
What you hear combines direct sound from the speakers with sound reflected by the room. Speaker and seat positions change how those contributions combine, especially in the bass. Start with placement, then consider suitable treatment or electronic correction. An uneven result at one seat does not by itself identify a speaker fault.
No sound or one speaker not working: what to check
For missing sound, check playback destination, selected input, mute, volume, balance and speaker selection before changing cables. Then inspect compatible connections with power off. If one channel remains silent, a controlled line-input swap can narrow the fault path. Stop for damage, abnormal heat or repeated protection shutdown; those need qualified service.
Turntable setup: what equipment do you need?
A turntable system needs a compatible phono stage, volume control, speaker amplification and speakers. These functions may share a box: a turntable can contain a phono stage, and powered speakers contain amplification. Trace the signal path before buying separate components, then set up the cartridge and tonearm according to their instructions.
Speaker placement in a small room: a practical guide
Start with secure supports, similar speaker-to-seat distances and the listening direction recommended for your speakers. Then adjust one position at a time while keeping playback settings consistent. Walls, desks and the listening seat all affect the result, so there is no universal wall distance that suits every small room.
Speaker specifications: what the numbers tell you
Read speaker specifications with their units and test conditions. Frequency response describes balance across frequencies; sensitivity describes level for a stated input; impedance describes the amplifier load. Power handling and maximum output answer different questions. A larger number or wider range is not automatically better, and no single specification predicts the result in your room.
Speaker wire gauge: length, resistance and connections
Choose speaker cable by the run length, conductor resistance, speaker load and the sizes accepted by both terminals. Longer runs and lower-impedance loads make cable resistance more important. In AWG sizing, a lower number means a thicker conductor. Secure connections and suitable installation matter more than the thickness of the outer jacket.
Do you need a subwoofer for music?
A subwoofer is useful when you want deeper bass, a better bass-source position or less low-frequency work for the main speakers. Those are separate goals, and the last requires suitable bass management. If your existing system already provides the bass and level you need, a subwoofer is optional regardless of speaker size.
Audio sound terms explained: describe what you hear
Audio descriptions are most useful when they identify a sound and explain what you hear. Tonal balance describes the relative emphasis of bass, midrange and treble; imaging describes apparent positions; soundstage describes perceived space. Words such as warm or bright are informal. Connect them to a recording and comparison rather than treating them as measurements or diagnoses.