Basics
No prior hi-fi vocabulary assumed.
Articles tagged Basics
Integrated amplifier, receiver, preamp and power amp: explained
A control preamplifier selects a source and adjusts listening volume. A power amplifier supplies the electrical output that drives passive speakers. An integrated amplifier combines those functions, while a conventional stereo receiver adds reception, traditionally radio. Digital inputs, streaming, a phono stage and headphone outputs are additional features to check, not functions guaranteed by every amplifier name.
Active, powered and passive speakers: what is the difference?
Passive speakers need an external power amplifier. Powered speakers include amplification. Active, in its precise technical sense, describes a crossover that divides the audio into frequency bands before separate amplifiers drive the relevant drivers. A powered speaker can use either arrangement, so check the design and connections rather than relying on the label alone.
What do you need for a hi-fi system?
A hi-fi system needs a source, volume control, amplification and speakers or headphones. Digital sources need digital-to-analogue conversion; records need a phono stage. Several functions can share one device, so a complete system may use only a few boxes. Follow the signal path to see what you already have and what is missing.
Phono vs line: which input should your turntable use?
A phono signal from a magnetic cartridge needs gain and playback equalization before it feeds a line input. A turntable’s processed LINE output goes to a line input; its unprocessed PHONO output goes to a compatible phono stage. The connectors can look identical, so check signal function and switch settings rather than plug shape.
Room acoustics basics: direct sound, reflections and bass
What you hear combines direct sound from the speakers with sound reflected by the room. Speaker and seat positions change how those contributions combine, especially in the bass. Start with placement, then consider suitable treatment or electronic correction. An uneven result at one seat does not by itself identify a speaker fault.
No sound or one speaker not working: what to check
For missing sound, check playback destination, selected input, mute, volume, balance and speaker selection before changing cables. Then inspect compatible connections with power off. If one channel remains silent, a controlled line-input swap can narrow the fault path. Stop for damage, abnormal heat or repeated protection shutdown; those need qualified service.
Turntable setup: what equipment do you need?
A turntable system needs a compatible phono stage, volume control, speaker amplification and speakers. These functions may share a box: a turntable can contain a phono stage, and powered speakers contain amplification. Trace the signal path before buying separate components, then set up the cartridge and tonearm according to their instructions.
Speaker placement in a small room: a practical guide
Start with secure supports, similar speaker-to-seat distances and the listening direction recommended for your speakers. Then adjust one position at a time while keeping playback settings consistent. Walls, desks and the listening seat all affect the result, so there is no universal wall distance that suits every small room.
Speaker specifications: what the numbers tell you
Read speaker specifications with their units and test conditions. Frequency response describes balance across frequencies; sensitivity describes level for a stated input; impedance describes the amplifier load. Power handling and maximum output answer different questions. A larger number or wider range is not automatically better, and no single specification predicts the result in your room.
Speaker wire gauge: length, resistance and connections
Choose speaker cable by the run length, conductor resistance, speaker load and the sizes accepted by both terminals. Longer runs and lower-impedance loads make cable resistance more important. In AWG sizing, a lower number means a thicker conductor. Secure connections and suitable installation matter more than the thickness of the outer jacket.
Do you need a subwoofer for music?
A subwoofer is useful when you want deeper bass, a better bass-source position or less low-frequency work for the main speakers. Those are separate goals, and the last requires suitable bass management. If your existing system already provides the bass and level you need, a subwoofer is optional regardless of speaker size.
Audio sound terms explained: describe what you hear
Audio descriptions are most useful when they identify a sound and explain what you hear. Tonal balance describes the relative emphasis of bass, midrange and treble; imaging describes apparent positions; soundstage describes perceived space. Words such as warm or bright are informal. Connect them to a recording and comparison rather than treating them as measurements or diagnoses.
Bookshelf vs floorstanding speakers: how to choose
Choose bookshelf or floorstanding speakers by the complete installation, required bass and listening level. A bookshelf speaker on a stand can occupy as much floor space as a slim tower. Neither format guarantees sound quality or suitability for a room. Compare the actual speakers, supports, placement requirements and amplifier compatibility.
Safer headphone listening: volume, time and exposure
Reduce headphone listening risk by lowering playback level and limiting time exposed to loud sound. A volume percentage cannot establish a safe level for every device and listener. Use compatible exposure monitoring as feedback, include other noisy activities, and seek professional assessment for persistent symptoms. Sudden hearing loss needs immediate medical attention.
Open-back vs closed-back headphones: how to choose
Open-back headphones let sound pass between the earcups and the room. Closed-back headphones reduce that exchange, making them a useful starting point for shared spaces, noisy surroundings and recording near microphones. Choose around those practical needs, then compare fit and sound. Neither enclosure type guarantees comfort, isolation or better sound quality.
Bluetooth vs Wi-Fi audio: compare the playback path
Bluetooth usually carries audio from a paired phone or computer to the listening device. Network playback can let a player receive music directly while the phone acts as a remote. Choose by where the music comes from and how you want to control it. Neither wireless label alone guarantees lossless audio or a particular sound quality.
Lossless vs high-resolution audio: what each means
Lossless describes encoding that preserves the digital audio samples supplied to it. High-resolution describes format specifications, commonly beyond CD’s 16-bit, 44.1 kHz reference. A file can be lossless without being high-resolution, or both. Neither label establishes the recording’s history, guarantees unchanged playback or proves an audible improvement.
What is a music streamer, and what does it replace?
A music streamer plays audio from supported network services or a local music library. It may be a separate box or a function inside an amplifier or speaker. Your phone can act as its remote control rather than carry the music. A streamer adds network playback; conversion, volume control and amplification must still happen somewhere in the system.
What is a DAC, and do you need an external one?
A DAC turns digital audio into an analogue electrical signal. Your computer, amplifier or powered speakers may already perform that conversion. An external DAC is useful when it supplies a missing connection, format or control, or addresses an identified playback problem. Digital music alone is not a reason to buy another box.
How to plan your first hi-fi system
Plan a first hi-fi system around what you play, where you listen and the equipment you already own. Choose a complete path from each source to speakers or headphones, including volume control and amplification. Check the connections and physical space, then budget for the missing equipment and accessories rather than buying a box for every function.
Hi-fi connections explained: what plugs into what?
A correct audio connection matches an output to an input that accepts its signal. Plug shape alone is not enough: RCA and XLR connectors can carry different kinds of audio, and USB ports have different jobs. Check direction, signal type and supported format before choosing a cable or converter.